CB22 Ceiling Batten
BattenMan CB22 metal batten is a cold rolled hat shaped section manufactured from .50g G550 Z275 galvanized Steel.
It provides the builder/specifier with a stable accurate and lightweight steel ceiling system which is ideal for the application of plasterboard.
The CB22 steel battens are versatile and easy to use, providing strength, lightness and rigidity with low cost. The 22mm deep profile can be used as a ceiling batten for internal fixing of ceiling lining particularly when space is an issue.
The CB 22 batten can be direct fixed by nail or screw through each batten flange or batten hangers may be used to provide additional adjustment to level a ceiling. Lowering or suspending a ceiling can be carried out using the CB22 batten in conjunction with our ceiling suspension system.
BattenMan Ceiling Battens comply with the requirements as laid down by the New Zealand Standard 4203: Table 3.4.1 for non-habitable roof spaces on domestic dwellings provided they are fitted in accordance with the manufacturers recommendations.
Each house is measured individually, eliminating costly onsite waste. Our trained installers ensure battens are fixed in accordance with the manufacturers recommendations.
CB35 Ceiling Batten
BattenMan CB35 ceiling battens are manufactured from .50g G550 Z275 galvanized Steel coil cut to the required length.
BattenMan CB35 ceiling battens have been produced to support Plaster Board and Fibrous Plaster Board onto ceiling joists and truss bottom chords. They comply with the requirements as laid down by the New Zealand Standard 4203: Table 3.4.1 for non-habitable roof spaces on domestic dwellings provided they are fitted in accordance with the manufacturers recommendations.
Our CB35 ceiling battens should be fixed at no greater than 1200mm spacing to the joists or bottom of the Truss Chord using 50mm galvanised ring shank nails.
BattenMan BH35 ceiling batten hangars may be used in place of direct fixing. BattenMan CB35 ceiling battens spacings may be at 450mm centers when using 1 O mm Plasterboard using Gypfast adhesive and 25×6 screws
Each house is measured individually, Eliminating costly onsite waste. Our trained installers ensure battens are fixed in accordance with the manufacturers recommendations.